CUPRA ATECA (KH7, KHP, KBP)

2.0 TSI 4Drive (221 kW / 300 CV) 09/18

Save vehicle in the list

Brake discs

Diameter
340mm
Thickness
30mm
Height
50mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Minimum Brembo Xtra brake disc thickness: 27,8 mm
Min. thickness
27mm
Units per box
1
Front
axle
for PR number:1LD
for PR number:1LD
Where to Buy
Diameter
310mm
Thickness
22mm
Height
48mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Minimum Brembo Xtra brake disc thickness: 20,5 mm
Min. thickness
20mm
Tightening torque
120Nm
Units per box
2
Rear
axle
for PR number:1KY;2ES
for PR number:1KY;2ES
Where to Buy

Brake pads

Width
132mm
Thickness
16mm
Height
77mm
Braking system
Brembo
Wear indicator
Prepared for wear indicator
WVA number
25145
Accessories
With anti-squeal shim
Front
axle
for PR number:FC1
for PR number:FC1
Where to Buy
Width
175mm
Thickness
20mm
Height
70mm
Braking system
TRW
Wear indicator
Electric
WVA number
24738, 25217
FMSI
D1633 8849
Accessories
With brake caliper bolts
Front
axle
for PR number:1LD
for PR number:1LD
Where to Buy
Width
123mm
Thickness
16mm
Height
56 - 61 mm
Braking system
Teves
Wear indicator
Without
WVA number
25009, 25011
FMSI
D1761 8996
Rear
axle
for PR number:1KY
for PR number:1KY
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">