FORD FIESTA V (JH_, JD_)

ST150 (110 kW / 150 CV) 03/05 - 06/08

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
253mm
Thickness
10mm
Height
33mm
Number of holes
4
Brake disc type
Solid
Centering
64mm
Minimum Brembo Xtra brake disc thickness: 9,1 mm
Min. thickness
8,9mm
Tightening torque
85Nm
Units per box
2
Rear
axle
Where to Buy

UPGRADE brake discs

Diameter
252mm
Thickness
10mm
Height
33mm
Number of holes
4
Brake disc type
Solid
Centering
64mm
Min. thickness
8,9mm
Tightening torque
85Nm
Units per box
0
Rear
axle
Where to Buy

Brake pads

Width
156mm
Thickness
18mm
Height
63 - 67 mm
Braking system
Teves
Wear indicator
Without
WVA number
23440, 23441
FMSI
D970 7871
Accessories
With piston clip
With anti-squeal shim
Front
axle
Where to Buy
Width
87mm
Thickness
14mm
Height
43mm
Braking system
Lucas
Wear indicator
Without
WVA number
23353
FMSI
D886 7763
Accessories
With brake caliper bolts
Rear
axle
Where to Buy

UPGRADE brake pads

Width
157mm
Thickness
18mm
WVA number
23440, 23441
Front
axle
Where to Buy
Width
87mm
Thickness
14mm
WVA number
23353
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">