FORD KUGA I

2.0 TDCi 4x4 (103 kW / 140 CV) 03/10 - 11/12

Brake discs

Diameter
302mm
Thickness
11mm
Height
51mm
Number of holes
5
Brake disc type
Solid
Centering
64mm
Minimum Brembo Xtra brake disc thickness: 9,5 mm
Min. thickness
9mm
Tightening torque
140Nm
Units per box
2
Rear
axle

Brake pads

Width
155 - 156 mm
Thickness
18mm
Height
62 - 67 mm
Braking system
Teves
Wear indicator
Without
WVA number
23724, 23723
FMSI
D1044 7947, D1230 7947, D1563 7947
Accessories
With piston clip
With accessories
With anti-squeal shim
Front
axle
Width
95mm
Thickness
16mm
Height
43mm
Braking system
TRW
Wear indicator
Without
WVA number
24537
FMSI
D1314 8429
Accessories
With accessories
With anti-squeal shim
With brake caliper bolts
Rear
axle

Brake pad accessories

Braking system
Teves
Type
Assembly kit
Front
axle

UPGRADE brake pads

Width
95mm
Thickness
16mm
WVA number
24537
Rear
axle

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
ATE
Position
Left
Front
axle
Diameter
57mm
Number of pistons
1
Braking system
ATE
Position
Right
Front
axle
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Left
Rear
axle
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Right
Rear
axle
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Left
Rear
axle
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Right
Rear
axle

Clutch master cylinders

Diameter
25,4mm
Threading
14 X 1 (2),2 14 X 1
Braking system
ATE
Material
Aluminium
Front
axle
Threading
12 X 1 (2)
Braking system
ATE
Material
Aluminium
Front
axle

Brake hoses

Length
500mm
Threading 1
F10X1
Threading 2
M10x1
Assembly position
Left
Right
Rear
axle
Length
435mm
Threading 1
M10X1
Threading 2
F10X1
Assembly position
Left
Right
Front
axle

Brake master cylinders

Diameter
19,05mm
Threading
12 X 9
Material
Plastic
Front
axle
Diameter
19,05mm
Threading
12 X 9
Material
Plastic
Front
axle
Diameter
19,05mm
Threading
12 X 9
Material
Plastic
Front
axle
Diameter
19,05mm
Threading
12 X 9
Material
Plastic
Front
axle

Central clutch release devices

Diameter
31mm
Braking system
FTE
Material
Plastic
Front
axle
Threading
12 X 9
Material
Plastic
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">