HONDA CR-V I (RD)

2.0 16V 4WD (RD1, RD3) (94 kW / 128 CV) 10/95 - 12/01

Brake discs

Diameter
282mm
Thickness
23mm
Height
47mm
Number of holes
5
Brake disc type
Ventilated
Centering
70mm
Min. thickness
21mm
Tightening torque
108Nm
Units per box
2
Front
axle

Brake pads

Width
138mm
Thickness
18mm
Height
52mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21497, 21498, 21499
FMSI
D1578 8791, D465 7345, D465 7573, D503 7382, D764 7573
Accessories
With anti-squeal shim
Front
axle
Transmission Type:Automatic Transmission
Transmission Type:Automatic Transmission
Width
149mm
Thickness
17mm
Height
58mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21653, 21651, 21652
FMSI
D503 7382
Accessories
With anti-squeal shim
Front
axle

UPGRADE brake pads

Width
149mm
Thickness
18mm
WVA number
21651, 21652, 21653
Front
axle

Drums

Diameter
220mm
Width
44,5mm
Height
60mm
Number of holes
5
Centering
64mm
Max diameter
221mm
Rear
axle
Diameter [mm]:220
Diameter [mm]:220

Shoes

Diameter
220mm
Width
36mm
Braking system
Akebono
Rear
axle

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
NISSIN
Position
Left
Front
axle
Construction Year from:02/1997; Construction Year to:12/2000
Construction Year from:02/1997; Construction Year to:12/2000
Diameter
57mm
Number of pistons
1
Braking system
NISSIN
Position
Right
Front
axle
Construction Year from:02/1997; Construction Year to:12/2000
Construction Year from:02/1997; Construction Year to:12/2000

Brake wheel cylinders

Diameter
20,64mm
Threading
10 x 1
Material
Aluminium
Assembly position
Right
Rear right
axle
Diameter
20,64mm
Threading
10 x 1
Material
Aluminium
Assembly position
Left
Rear left
axle

Brake hoses

Length
285mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Rear
axle
Length
455mm
Threading 1
10
Threading 2
F10X1
Assembly position
Right
Front right
axle
Length
455mm
Threading 1
10
Threading 2
F10X1
Assembly position
Left
Front left
axle

Brake master cylinders

Diameter
15,9mm
Braking system
Nissin
Material
Aluminium
Front
axle
Diameter
15,87mm
Threading
10 x 1
Material
Aluminium
Front
axle

Clutch cylinders

Diameter
19,05mm
Threading
10 x 1
Material
Cast Iron
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">