HYUNDAI VELOSTER (FS)

1.6 MPI (97 kW / 132 CV) 04/11 - 12/17

Brake discs

Diameter
280mm
Thickness
23mm
Height
45mm
Number of holes
5
Brake disc type
Ventilated
Centering
69mm
Minimum Brembo Xtra brake disc thickness: 21,6 mm
Min. thickness
21,4mm
Units per box
2
Front
axle
Diameter
262mm
Thickness
10mm
Height
45mm
Number of holes
5
Brake disc type
Solid
Centering
76mm
Minimum Brembo Xtra brake disc thickness: 8,6 mm
Min. thickness
8,4mm
Units per box
2
Rear
axle

Brake pads

Width
133mm
Thickness
18mm
Height
60mm
Braking system
Bosch
Wear indicator
Acoustic
WVA number
25010, 25709, 25708
FMSI
D1543 8751, D1595 8810, D1971 9197
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
Width
100mm
Thickness
16mm
Height
41mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
24934, 24935, 24936
FMSI
D1313 8428, D1445 8428, D1446 8428, D1544 8428, D1812 8428
Accessories
With anti-squeal shim
Rear
axle
Construction Year to:12/2012
Construction Year to:12/2012
Width
100mm
Thickness
16mm
Height
41mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
25337, 25339, 25338
FMSI
D1544 8428, D1594 8428, D2050 9280
Accessories
With anti-squeal shim
With piston clip
With accessories
Rear
axle
Construction Year to:01/2015; not for country specific design:Europe
Construction Year to:01/2015; not for country specific design:Europe
Width
100mm
Thickness
16mm
Height
41mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
25337, 25338, 25339
FMSI
D1594 8428
Accessories
With piston clip
With accessories
With anti-squeal shim
Rear
axle
Construction Year from:01/2013
Construction Year from:01/2013

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
MOBIS
Position
Left
Front
axle
Construction Year to:05/2012
Construction Year to:05/2012
Diameter
57mm
Number of pistons
1
Braking system
MOBIS
Position
Right
Front
axle
Construction Year to:05/2012
Construction Year to:05/2012
Diameter
34mm
Number of pistons
1
Braking system
KASCO
Position
Left
Rear
axle
Diameter
34mm
Number of pistons
1
Braking system
KASCO
Position
Right
Rear
axle

Brake master cylinders

Threading
12 X 8,5
Material
Plastic
Front
axle

Clutch cylinders

Diameter
20,64mm
Threading
10 x 1
Material
Cast Iron
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">