JAGUAR XJ (X351)

5.0 SCV8 (375 kW / 510 CV) 10/09 - 12/19

Save vehicle in the list

Brake discs

Diameter
355mm
Thickness
32mm
Height
48mm
Number of holes
5
Brake disc type
Ventilated
Centering
71mm
Min. thickness
30mm
Units per box
1
Front
axle
Where to Buy
Diameter
380mm
Thickness
36mm
Height
48mm
Number of holes
5
Brake disc type
Ventilated
Centering
71mm
Min. thickness
34mm
Units per box
1
Front
axle
Where to Buy
Diameter
326mm
Thickness
20mm
Height
38mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Min. thickness
18mm
Tightening torque
103Nm
Units per box
2
Rear
axle
Where to Buy
Diameter
376mm
Thickness
26mm
Height
42mm
Number of holes
5
Brake disc type
Ventilated
Centering
65mm
Min. thickness
24mm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
193mm
Thickness
18mm
Height
79mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
24475, 24474
FMSI
D1448 8616
Accessories
With anti-squeal shim
With piston clip
With accessories
Front
axle
Where to Buy
Width
114mm
Thickness
17mm
Height
63mm
Braking system
TRW
Wear indicator
Prepared for wear indicator
WVA number
25742
FMSI
D1753 8981
Accessories
With anti-squeal shim
Rear
axle
Vehicle Identification Number (VIN) from:V90866
Vehicle Identification Number (VIN) from:V90866
Where to Buy
Width
122mm
Thickness
16mm
Height
64mm
Braking system
Teves
Wear indicator
Without
WVA number
25114, 25115
FMSI
D1449 8617
Accessories
With anti-squeal shim
Rear
axle
Vehicle Identification Number (VIN) to:V90865
Vehicle Identification Number (VIN) to:V90865
Where to Buy

Brake pad accessories

Length
551mm
Type
Wear indicator
Front
axle
Where to Buy
Length
635mm
Type
Wear indicator
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
42mm
Number of pistons
2
Braking system
ATE
Position
Left
Front
axle
Construction Year from:01/2010
Construction Year from:01/2010
Where to Buy
Diameter
42mm
Number of pistons
2
Braking system
ATE
Position
Right
Front
axle
Construction Year from:01/2010
Construction Year from:01/2010
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">