NISSAN ALMERA TINO (V10)

2.2 dCi (100 kW / 136 CV) 09/03 - 02/06

Brake discs

Diameter
280mm
Thickness
28mm
Height
49mm
Number of holes
5
Brake disc type
Ventilated
Centering
68mm
Min. thickness
26mm
Tightening torque
108Nm
Units per box
2
Front
axle
Diameter
278mm
Thickness
10mm
Height
45mm
Number of holes
5
Brake disc type
Solid
Centering
68mm
Min. thickness
9mm
Tightening torque
108Nm
Units per box
2
Rear
axle

Brake pads

Width
132mm
Thickness
17mm
Height
58mm
Braking system
Lucas
Wear indicator
Acoustic
WVA number
23564, 23563, 23094
Accessories
With anti-squeal shim
Front
axle
Width
132mm
Thickness
17mm
Height
58mm
Braking system
Lucas
Wear indicator
Without
WVA number
23095
FMSI
D2012 9242
Accessories
With anti-squeal shim
Front
axle
Width
82mm
Thickness
16mm
Height
57mm
Braking system
Lucas
Wear indicator
Without
WVA number
21545
FMSI
D1187 8305
Accessories
With anti-squeal shim
With accessories
With brake caliper bolts
Rear
axle

Remanufactured calipers

Diameter
57mm
Number of pistons
1
Braking system
LUCAS
Position
Left
Front
axle
Construction Year to:11/2005
Construction Year to:11/2005
Diameter
57mm
Number of pistons
1
Braking system
LUCAS
Position
Right
Front
axle
Construction Year to:11/2005
Construction Year to:11/2005
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Left
Rear
axle
Construction Year to:11/2005
Construction Year to:11/2005
Diameter
38mm
Number of pistons
1
Braking system
TRW
Position
Right
Rear
axle
Construction Year to:11/2005
Construction Year to:11/2005

Clutch master cylinders

Diameter
23,81mm
Threading
12 x 1 (3)
Material
Aluminium
Front
axle
Diameter
23,81mm
Threading
12 x 1 (2)
Material
Aluminium
Front
axle

Brake hoses

Length
615mm
Threading 1
F10X1
Threading 2
10
Assembly position
Left
Rear left
axle
Length
610mm
Threading 1
F10X1
Threading 2
10
Assembly position
Right
Rear right
axle
Length
500mm
Threading 1
F10X1
Threading 2
10
Assembly position
Right
Front right
axle
Length
500mm
Threading 1
F10X1
Threading 2
10
Assembly position
Left
Front left
axle

Brake master cylinders

Diameter
15,87mm
Threading
10 x 1
Material
Aluminium
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">