OPEL MANTA A (58_, 59_)

1.6 (44 kW / 60 CV) 02/75 - 08/75

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
238mm
Thickness
11mm
Height
56mm
Number of holes
4
Brake disc type
Solid
Centering
73mm
Min. thickness
8mm
Tightening torque
110Nm
Units per box
2
Front
axle
Vehicle Identification Number (VIN) to:51019912
Vehicle Identification Number (VIN) to:51019912
Where to Buy
Diameter
246mm
Thickness
12,5mm
Height
56mm
Number of holes
4
Brake disc type
Solid
Centering
73mm
Min. thickness
9,7mm
Tightening torque
110Nm
Units per box
2
Front
axle
Vehicle Identification Number (VIN) from:51019913
Vehicle Identification Number (VIN) from:51019913
Where to Buy

Brake pads

Width
77mm
Thickness
17mm
Height
66mm
Braking system
Teves
Wear indicator
Without
WVA number
20323
FMSI
D96 7032
Accessories
With anti-squeal shim
Front
axle
Where to Buy

UPGRADE brake pads

Width
76mm
Thickness
15mm
WVA number
20323
Front
axle
Where to Buy

Drums

Diameter
200mm
Width
52,5mm
Height
67mm
Number of holes
4
Centering
57mm
Max diameter
201mm
Rear
axle
Where to Buy

Shoes

Diameter
200mm
Width
46mm
Braking system
Bendix
Parking brake lever
With handbrake lever
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
48mm
Number of pistons
2
Braking system
ATE
Position
Left
Front
axle
Where to Buy
Diameter
48mm
Number of pistons
2
Braking system
ATE
Position
Right
Front
axle
Where to Buy

Clutch master cylinders

Diameter
20,64mm
Threading
10 x 1 (3)
Braking system
DELCO
Material
Cast Iron
Front
axle
Where to Buy

Brake wheel cylinders

Diameter
15,87mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
19,05mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy
Diameter
19,05mm
Threading
10 x 1
Braking system
ATE
Material
Cast Iron
Rear
axle
Where to Buy

Brake hoses

Length
423mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">