RENAULT CLIO II (BB_, CB_)

2.0 16V Sport (132 kW / 179 CV) 01/04 - 04/05

Save vehicle in the list

Brake discs

Diameter
238mm
Thickness
8mm
Height
75mm
Number of holes
4
Brake disc type
Solid
Centering
52mm
Min. thickness
7mm
Tightening torque
90Nm
Units per box
1
Rear
axle
Where to Buy
Diameter
238mm
Thickness
8mm
Height
75mm
Number of holes
4
Brake disc type
Solid
Centering
25mm
Min. thickness
7mm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
129mm
Thickness
18mm
Height
55mm
Braking system
Lucas
Wear indicator
Without
WVA number
23172
FMSI
D1145 8255, D1496 9310
Accessories
With accessories
With anti-squeal shim
With brake caliper bolts
Front
axle
Where to Buy
Width
105mm
Thickness
11mm
Height
55mm
Braking system
Bendix
Wear indicator
Prepared for wear indicator
WVA number
20973, 20974
FMSI
D1458 8658, D1482 8658
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Bendix
Type
Assembly kit
Rear
axle
Where to Buy

Remanufactured calipers

Diameter
30mm
Number of pistons
1
Braking system
BENDIX
Position
Left
axle
Where to Buy
Diameter
30mm
Number of pistons
1
Braking system
BENDIX
Position
Right
axle
Where to Buy
Diameter
54mm
Number of pistons
1
Braking system
LUCAS
Position
Left
axle
Where to Buy
Diameter
54mm
Number of pistons
1
Braking system
LUCAS
Position
Right
axle
Where to Buy

Clutch master cylinders

Diameter
20,64mm
Threading
10 x 1 (1),12 x 1 (1)
Braking system
ATE
Material
Aluminium
Front
axle
Where to Buy
Diameter
22,2mm
Threading
12 x 1 (1),10 x 1 (1)
Braking system
Bosch
Material
Aluminium
Front
axle
Where to Buy

Brake hoses

Length
365mm
Threading 1
F10X1
Threading 2
M10X1
Assembly position
Left
Right
Rear
axle
Where to Buy
Length
190mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Internal
Left
Right
Rear
axle
Where to Buy
Length
345mm
Threading 1
M10X1
Threading 2
F10X1
Assembly position
Left
Right
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">