SAAB 9000 Hatchback

2.0 (99 kW / 135 CV) 10/88 - 01/90

Save vehicle in the list

Brake discs

Diameter
280mm
Thickness
23,4mm
Height
44mm
Number of holes
4
Brake disc type
Ventilated
Centering
68mm
Min. thickness
21,5mm
Tightening torque
120Nm
Units per box
2
Front
axle
Construction Year to:08/1989
Construction Year to:08/1989
Where to Buy
Diameter
280mm
Thickness
25mm
Height
44mm
Number of holes
4
Brake disc type
Ventilated
Centering
68mm
Min. thickness
23mm
Tightening torque
120Nm
Units per box
2
Front
axle
Construction Year from:09/1989
Construction Year from:09/1989
Where to Buy
Diameter
258mm
Thickness
9mm
Height
43mm
Number of holes
4
Brake disc type
Solid
Centering
68mm
Min. thickness
7,5mm
Tightening torque
120Nm
Units per box
2
Rear
axle
Where to Buy

Brake pads

Width
95mm
Thickness
18mm
Height
52mm
Braking system
Lucas
Wear indicator
Without
WVA number
21068
FMSI
D321 7181, D403 7292, D439 7323
Accessories
With brake caliper bolts
Front
axle
Construction Year to:08/1989
Construction Year to:08/1989
Where to Buy
Width
156mm
Thickness
20mm
Height
55mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
21154, 21155
FMSI
D403 7292
Accessories
With piston clip
Front
axle
Construction Year from:09/1989
Construction Year from:09/1989
Where to Buy
Width
125mm
Thickness
15mm
Height
38mm
Braking system
Teves
Wear indicator
Without
WVA number
21089, 21090
FMSI
D322 7221
Accessories
With piston clip
Rear
axle
Where to Buy

Brake pad accessories

Braking system
Teves
Type
Assembly kit
Front
axle
Construction Year from:09/1989
Construction Year from:09/1989
Where to Buy
Braking system
Teves
Type
Assembly kit
Rear
axle
Where to Buy

Remanufactured calipers

Number of pistons
1
Braking system
GIRLING
Position
Left
Front left
axle
Where to Buy
Number of pistons
1
Braking system
GIRLING
Position
Right
Front right
axle
Where to Buy
Number of pistons
1
Braking system
ATE
Position
Left
Rear left
axle
Where to Buy
Number of pistons
1
Braking system
ATE
Position
Right
Rear right
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">