SEAT EXEO ST (3R5)

2.0 TFSI (147 kW / 200 CV) 06/09 - 05/13

Brake discs

Diameter
320mm
Thickness
30mm
Height
46mm
Number of holes
5
Brake disc type
Ventilated
Centering
68mm
Min. thickness
28mm
Tightening torque
120Nm
Units per box
2
Front
axle
for PR number:1LA
for PR number:1LA
Diameter
288mm
Thickness
12mm
Height
36mm
Number of holes
5
Brake disc type
Solid
Centering
68mm
Min. thickness
10mm
Tightening torque
120Nm
Units per box
2
Rear
axle
for PR number:1KW
for PR number:1KW

Brake pads

Width
155 - 157 mm
Thickness
20mm
Height
73mm
Braking system
Teves
Wear indicator
Electric
WVA number
23801, 23763
FMSI
D1111 7796
Accessories
With accessories
With anti-squeal shim
With piston clip
Front
axle
for PR number:1LA
for PR number:1LA
Width
106mm
Thickness
17mm
Height
57mm
Braking system
Lucas
Wear indicator
Prepared for wear indicator
WVA number
23914
FMSI
D1108 8213
Accessories
With accessories
With anti-squeal shim
With brake caliper bolts
Rear
axle
for PR number:1KW
for PR number:1KW

UPGRADE brake pads

Width
105mm
Thickness
17mm
Wear indicator
Prepared for wear indicator
WVA number
23914
Rear
axle
for PR number:1KW
for PR number:1KW

Remanufactured calipers

Diameter
60mm
Number of pistons
1
Braking system
ATE
Position
Left
Front
axle
for PR number:1LA
for PR number:1LA
Diameter
60mm
Number of pistons
1
Braking system
ATE
Position
Right
Front
axle
for PR number:1LA
for PR number:1LA
Diameter
41mm
Number of pistons
1
Braking system
TRW
Position
Left
Rear
axle
for PR number:1KW
for PR number:1KW
Diameter
41mm
Number of pistons
1
Braking system
TRW
Position
Right
Rear
axle
for PR number:1KW
for PR number:1KW

Clutch master cylinders

Diameter
25,4mm
Threading
12 x 1 (2)
Braking system
TRW
Material
Aluminium
Front
axle
Diameter
25,4mm
Threading
12 x 1 (2)
Braking system
ATE
Material
Aluminium
Front
axle

Brake hoses

Length
280mm
Threading 1
F10X1
Threading 2
banjo
Assembly position
Left
Right
Rear
axle
Length
330mm
Threading 1
F10X1
Threading 2
F10X1
Assembly position
Left
Right
Front
axle

Brake master cylinders

Diameter
19,05mm
Threading
8,7
Braking system
SACHS
Material
Aluminium
Front
axle

Clutch cylinders

Diameter
22,2mm
Threading
12
Braking system
SACHS
Material
Cast Iron
Front
axle
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">