MERCEDES-BENZ S-CLASS (W140)

S 280 (140.028) (142 kW / 193 CV) 02/93 - 10/98

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
320mm
Thickness
30mm
Height
82mm
Number of holes
5
Brake disc type
Ventilated
Centering
67mm
Min. thickness
27,4mm
Tightening torque
130Nm
Units per box
1
Front
axle
Construction Year from:10/1995
Construction Year from:10/1995
Where to Buy
Diameter
290mm
Thickness
12mm
Height
55mm
Number of holes
5
Brake disc type
Solid
Centering
67mm
Min. thickness
9,8mm
Tightening torque
150Nm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
100mm
Thickness
19mm
Height
86mm
Braking system
Girling
Wear indicator
Prepared for wear indicator
WVA number
21303
FMSI
D577 7457, D689 7564
Accessories
With anti-squeal shim
Front
axle
Where to Buy
Width
62mm
Thickness
16mm
Height
70mm
Braking system
Teves
Wear indicator
Prepared for wear indicator
WVA number
21305
FMSI
D577 7457, D603 7484, D603 7526
Accessories
With anti-squeal shim
Rear
axle
Where to Buy

UPGRADE GT kit

Diameter
355mm
Thickness
32mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Front
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">