MITSUBISHI LANCER VI (CJ_, CP_)

EVO VI (CP9A) (206 kW / 280 CV) 01/99 - 02/01

Save vehicle in the list
This application is not available for your country. Contact us for more information

UPGRADE brake discs

Diameter
320mm
Thickness
32mm
Height
44mm
Number of holes
5
Brake disc type
Solid
Centering
69mm
Min. thickness
29,8mm
Units per box
0
Front
axle
Rim Size [inch]:17
Rim Size [inch]:17
Where to Buy

Brake pads

Width
150mm
Thickness
16mm
Height
58mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
21363, 21768, 21769
FMSI
D530 7412, D723 7412
Accessories
With accessories
With anti-squeal shim
Front
axle
Where to Buy

UPGRADE GT kit

Diameter
355mm
Thickness
32mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Front
axle
Where to Buy
Diameter
355mm
Thickness
32mm
Caliper pistons
6
Disc type
2 pieces
Caliper type
Monoblock
Front
axle
Where to Buy
Diameter
350mm
Thickness
34mm
Caliper pistons
6
Disc type
2 pieces
Caliper type
Monoblock
Front
axle
Where to Buy
Diameter
328mm
Thickness
28mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
2 pieces
Rear
axle
Where to Buy
Diameter
328mm
Thickness
28mm
Caliper pistons
4
Disc type
2 pieces
Caliper type
Monoblock
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">