TOYOTA HIGHLANDER / KLUGER (_U5_)

3.5 AWD (GSU55_) (183 kW / 249 CV) 09/14 - 11/16

Save vehicle in the list
This application is not available for your country. Contact us for more information

Brake discs

Diameter
328mm
Thickness
28mm
Height
49mm
Number of holes
5
Brake disc type
Ventilated
Centering
62mm
Minimum Brembo Xtra brake disc thickness: 25,8 mm
Min. thickness
25mm
Units per box
1
Front
axle
Where to Buy
Diameter
309mm
Thickness
10mm
Height
63mm
Number of holes
5
Brake disc type
Solid
Centering
62mm
Min. thickness
8,5mm
Units per box
1
Rear
axle
Where to Buy
Diameter
309mm
Thickness
10mm
Height
70mm
Number of holes
5
Brake disc type
Solid
Centering
62mm
Min. thickness
8,5mm
Units per box
1
Rear
axle
Where to Buy

Brake pads

Width
167mm
Thickness
18mm
Height
59mm
Braking system
Advics
Wear indicator
Without
WVA number
24452
FMSI
D1324 8436, D1324 9108, D1567 8776
Accessories
With accessories
With anti-squeal shim
Front
axle
Where to Buy
Width
115mm
Thickness
15mm
Height
46mm
Braking system
Akebono
Wear indicator
Acoustic
WVA number
24918
FMSI
D1391 8500, D1391 8809, D1391 9084
Accessories
With anti-squeal shim
Rear
axle
Where to Buy
Exceeding the standards

Brembo Prime Brake Fluid

The Brembo Prime Brake Fluid products pass the standards applied for class 4, 5.1 and 6 brake fluid.
The product offers greater resistance against Vapour Lock, ensuring braking efficiency even at low temperatures.Thanks to the excellent corrosion- and oxidation-resistant properties, the Brembo brake fluids also make it possible to achieve long-term protection against alteration of fluid chemical/physical properties when in the operating circuit, thus keeping it intact.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
XTRA line<br />BRAKE FLUID

XTRA line
BRAKE FLUID

Xtra brake fluid is the ideal solution that combines the high resistance to high temperatures of the DOT 5.1 fluid and the low viscosity of the DOT 4 low viscosity.
Viscosity is an important factor for the correct operation of the braking system, above all in modern vehicles with anti-locking systems (ABS) and electronic systems for traction and stability control (ESP).
In these systems, the fluid flows through the control mechanisms (generally valves with very limited passages) and it is of fundamental importance for the liquid to be very fluid precisely because of the need for a precise and immediate transfer.
Due to these characteristics, it is the liquid that Brembo suggests in combination with the products of the Xtra range (discs, pads, calipers), for sporty and safe road driving.
More information
Check the compatibility of your braking system with the brake fluid selected in the service manual of your car.
Click here to download the Safety Data Sheet for the Brembo brake fluid
Privacy Policy">